Opamp: OP01B

 

Key Features

  • Large Output Range 
  • Supply Voltage 5V ± 10%
  • Small Area 0.031mm² 
  • Size x=128.2µm y=243µm 
  • Suitable For SC - Applications
  • Power-Down-Mode Ivdd < 1nA

Symbol

symbol

Description

The OP01B cell is an internally compensated operational amplifier with a PMOS input stage. The amplifier is designed for universal applications, such as switched capacitor or internal antialiasing filters. 
The operational amplifier has a power-down mode to permit very low standby currents. This mode is controlled by the complementary signals "pd" and "xpd". 

Pin List

Pin Description Capacitance
inn inverting input 0.5pF
inp noninverting input 0.5pF
xpd power down not 0.05pF
pd power down 0.05pF
out analog output -
vdda positive analog power supply -
vssa negative analog power supply -
 

Electrical Parameters

Parameter Symbol Min Typ Max Unit
Power Supply Range  Vdda 4.50 5.00 5.50 V
Temperature Range  Temp  -40 25 125 deg 
AC Parameters   
Open Loop Gain  A0  92 95 100 dB 
Unity Gain Bandwidth (10.0 pF / 10.0 MOhm)
Phase Margin		 BW 5.0 11.9 32.6 MHz
Øm 62.6 81.4 88.0 deg
Unity Gain Bandwidth (35.0 pF / 10.0 MOhm)
Phase Margin		 BW 3.77 7.82 19.94 MHz
Øm 45.8 52.1 57.1 deg
Common Mode Rejection Ratio  CMRR 73 80 88 dB
Power Supply Rejection Ratio Vdd PSRRvdd 89 102 108 dB
Power Supply Rejection Ratio Vss PSRRvss 73 80 88 dB
Output Resistance (closed loop) Rout 0.84 1.70 3.05 Ohm
DC Parameters   
Input Offset Voltage  Vos -10   10 mV
Power Supply Current  Idd 0.09 0.26 0.73 mA
Power Consumption  PVdd 0.39 1.29 4.00 mW
Output Source Current Isource 0.46 0.97 2.37 mA
Output Sink Current Isink 5.8 13.6 24.0 mA
Common Mode Input Range CMIR(L) 0.20 0.48 1.08 V
Vdda - CMIR(H) 0.86 1.10 1.28 V
Output Range (Rl = 10.0 MOhm) Vout(L)   0   V
Vdda - Vout(H)   0   V
Transient Parameters   
Slew Rate - Rise SRP 2.95 8.97 25.45 V/µs
Slew Rate - Fall SRN 3.2 10.1 30.1 V/µs
Settling Time - Rise  TSP  0.12 0.30 0.81 µs
Settling Time - Fall  TSN  0.10 0.26 0.73 µs
Startup Time  Tstart  0.16 0.40 0.88 µs
Total Harmonic Distortion  THD  - 107 - 126 - 137 dB
Noise Parameters   
Equivalent Input Noise @10Hz  EN(10Hz) - 0.44 - µV/sqrt(Hz)
Equivalent Input Noise @100KHz  EN(100Hz) - 14.9 - nV/sqrt(Hz)
Back to Top